C/C++ Tooling

WebAssembly components can be built from C and C++ using clang, the C language family frontend for LLVM.

wit-bindgen is a tool to generate guest language bindings from a given .wit file. When compiling C or C++ code to WebAssembly components, we say that C or C++ is the "guest" language, and WebAssembly is the "host" language. In this case, "bindings" are C or C++ declarations: type signatures that correspond to WIT functions, and type definitions that correspond to WIT types. The bindings generator only generates declarations; you have to write the code that actually implements these declarations, if you're developing your own .wit files. For WIT interfaces that are built in to WASI, the code is part of the WebAssembly runtime that you will be using.

C/C++ currently lacks an integrated toolchain. However, wit-bindgen can generate source-level bindings for Rust, C, Java (TeaVM), and TinyGo, with the ability to add more language generators in the future.

wit-bindgen can be used to build C applications that can be compiled directly to WebAssembly modules using clang with a wasm32-wasi target.

1. Download dependencies

First, install the following dependencies:

1. wit-bindgen CLI
2. wasm-tools
   • wasm-tools can be used to inspect compiled WebAssembly modules and components, as well as converting between preview1 modules and preview2 components in the optional manual workflow.
3. The WASI SDK
   • WASI SDK is a WASI enabled C/C++ toolchain which includes a version of the C standard library (libc) implemented with WASI interfaces, among other artifacts necessary to compile C/C++ to WebAssembly.
   • On a Linux system, you can skip to the "Install" section. To build from source, start from the beginning of the README.

A WASI SDK installation will include a local version of clang configured with a WASI sysroot. (A sysroot is a directory containing header files and libraries for a particular target platform.) Follow these instructions to configure WASI SDK for use.

2. Generate program skeleton from WIT

Start by pasting the contents of the sample adder/world.wit file into a local file. Then generate a C skeleton from wit-bindgen using this file:

$ wit-bindgen c path/to/adder/world.wit
Generating "adder.c"
Generating "adder.h"
Generating "adder_component_type.o"

This command generates several files:

1. adder.h (based on the adder world). This header file contains, amidst some boilerplate, the prototype of the add function, which should look like this. (The name of the function has been prefixed with "exports".)

  uint32_t exports_docs_adder_add_add(uint32_t x, uint32_t y);

2. adder.c, which interfaces with the component model ABI to call your function. This file contains an extern declaration that looks like:

    extern void __component_type_object_force_link_adder(void);

3. adder_component_type.o, which contains object code, including the definition of the __component_type_object_force_link_adder function, which must be linked via clang.

3. Write program code

Next, create a file named component.c with code that implements the adder world: that is, code which fulfills the definition of the interface function declared in adder.h.

#include "adder.h"

uint32_t exports_docs_adder_add_add(uint32_t x, uint32_t y)
{
	return x + y;
}

4. Compile a WebAssembly Preview 2 component with wasi-sdk's wasm32-wasip2-clang

"P1" refers to WASI Preview 1, the initial version of the WASI APIs. "P2" refers to WASI Preview 2, which introduced the component model.

While in the past building a P2 component required conversion from a P1 component, we can now build a P2 component directly by using the wasm32-wasip2-clang binary that was installed by the WASI SDK.

If necessary, change /opt/wasi-sdk to the path where you installed the WASI SDK.

/opt/wasi-sdk/bin/wasm32-wasip2-clang \
    -o adder.wasm \
    -mexec-model=reactor \
    component.c \
    adder.c \
    adder_component_type.o

Breaking down each part of this command:

• -o adder.wasm configures the output file that will contain binary WebAssembly code.
• -mexec-model=reactor controls the desired execution model of the generated code. The argument can be either reactor or command. In this case, we pass in -mexec-model=reactor to build a reactor component. A reactor component is more like a library, while a command component is more like an executable.
• component.c contains the code you wrote to implement the adder world.
• adder.c and adder_component_type.o were generated by wit-bindgen and contain necessary scaffolding (e.g. function exports) to enable building component.c into a WebAssembly binary.

After this command completes, you will have a new file named adder.wasm available in the source folder.

You can verify that adder.wasm is a valid WebAssembly component with the following command:

> wasm-tools print adder.wasm | head -1
(component

For use cases that require building a P1 module and/or adapting an existing P1 module into a P2 module, such as building for a platform that does not support P2, details on a more manual approach using wasi-sdk's clang and wasm-tools can be found below:

$WASI_SDK_PATH/bin/clang \
    -o adder.wasm \
    -mexec-model=reactor \
    component.c \
    adder.c \
    adder_component_type.o

> wasm-tools print adder.wasm | head -1
(module $adder.wasm

wasm-tools component new adder.wasm -o adder.component.wasm

#include "adder.h"
#include <stdio.h>

uint32_t exports_docs_adder_add_add(uint32_t x, uint32_t y)
{
	uint32_t result = x + y;
        // On traditional platforms, printf() prints to stdout, but on Wasm platforms,
        // stdout and the idea of printing to an output stream is
        // introduced and managed by WASI.
        //
        // When building this code with wasi-libc (as a part of wasi-sdk), the printf call
        // below is implemented with code that uses `wasi:cli/stdout` and `wasi:io/streams`.
	printf("%d", result);
	return result;
}

> wasm-tools component new adder.wasm -o adder.component.wasm
error: failed to encode a component from module

Caused by:
    0: failed to decode world from module
    1: module was not valid
    2: failed to resolve import `wasi_snapshot_preview1::fd_close`
    3: module requires an import interface named `wasi_snapshot_preview1`

wasm-tools component new \
    adder.wasm \
    --adapt wasi_snapshot_preview1.wasm \
    -o adder.component.wasm

5. Inspect the built component

Finally, you can inspect a WIT representation of the imports and exports of your component (including any WASI imports if you used them):

$ wasm-tools component wit adder.component.wasm
package root:component;

world root {
  import wasi:io/error@0.2.2;
  import wasi:io/streams@0.2.2;
  import wasi:cli/stdin@0.2.2;
  import wasi:cli/stdout@0.2.2;
  import wasi:cli/stderr@0.2.2;
  import wasi:cli/terminal-input@0.2.2;
  import wasi:cli/terminal-output@0.2.2;
  import wasi:cli/terminal-stdin@0.2.2;
  import wasi:cli/terminal-stdout@0.2.2;
  import wasi:cli/terminal-stderr@0.2.2;
  import wasi:clocks/wall-clock@0.2.2;
  import wasi:filesystem/types@0.2.2;
  import wasi:filesystem/preopens@0.2.2;

  export add: func(x: s32, y: s32) -> s32;
}
...

6. Run the component with wasmtime --invoke

If you want to quickly run the add export without writing a host application that embeds Wasmtime, you can invoke it directly with the Wasmtime CLI.

wasmtime run --invoke 'add(2, 2)' adder.wasm

Depending on your Wasmtime version, the shorthand form may also work:

wasmtime --invoke 'add(2,2)' adder.wasm

7. Run the component from the example C host

This repository includes a C application that can execute components that implement the add interface. This application embeds Wasmtime using the Wasmtime C API: component-model/examples/example-c-host/host.c.

The application expects three arguments: the two numbers to add and the Wasm component that executed the addition. For example:

./adder-host <x> <y> <path-to-component.wasm>

You can either use a Dockerfile to execute your add component with the C application or directly run the application.

Option A: Compile and run the host directly

If the Wasmtime C API headers and library are installed on your system, you can compile and run the host directly:

On Linux, the following commands install the C API artifacts in /usr/local using the same approach as the Dockerfile:

sudo apt-get update
sudo apt-get install -y --no-install-recommends \
  gcc libc6-dev curl xz-utils ca-certificates

WASMTIME_VERSION=42.0.1
case "$(uname -m)" in
  x86_64) WASMTIME_ARCH=x86_64 ;;
  aarch64|arm64) WASMTIME_ARCH=aarch64 ;;
  *) echo "unsupported architecture: $(uname -m)" >&2; exit 1 ;;
esac

curl -sL "https://github.com/bytecodealliance/wasmtime/releases/download/v${WASMTIME_VERSION}/wasmtime-v${WASMTIME_VERSION}-${WASMTIME_ARCH}-linux-c-api.tar.xz" \
  | sudo tar xJ --strip-components=1 -C /usr/local

sudo ldconfig

cd component-model/examples/example-c-host
gcc -o adder-host host.c -lwasmtime
./adder-host 1 2 /absolute/path/to/adder.wasm

If libwasmtime.so is not in a default library path on Linux, set LD_LIBRARY_PATH before running:

LD_LIBRARY_PATH=/path/to/wasmtime/lib ./adder-host 1 2 /absolute/path/to/adder.wasm

Expected output:

1 + 2 = 3

Option B: Run with Docker

Instead of installing the Wasmtime C API, you can use the provided Dockerfile which builds the C application.

From component-model/examples/example-c-host:

cd component-model/examples/example-c-host
docker build -t example-c-host:latest .

Then run the container, passing in the component as a volume:

docker run --rm \
  -v "$(pwd)/../example-host/add.wasm":/component/add.wasm:ro \
  example-c-host:latest

Expected output:

1 + 2 = 3

The default command runs adder-host 1 2 /component/add.wasm, so you can also override the arguments:

docker run --rm \
  -v "$(pwd)/../example-host/add.wasm":/component/add.wasm:ro \
  example-c-host:latest 40 2 /component/add.wasm